Home About Contact Art Photobucket

Saturday, January 22, 2011

Coffee Filter Flowers Tutorial

This post was first featured on the now defunct blog, M&J Hooray!


DIY Day success! I have created the most amazingly beautiful flowers made out of coffee filters.

I love creating. Unfortunately, I have a terrible habit of not finishing what I've started. In the past, I have had amazing ideas for tablescapes, paintings, decorating, or organizing, but did not follow through. Either I got in way over my head or the project wasn't going exactly as I thought. So I would quit. I think that is the story for a lot of people, so I don't feel alone.

I have been trying out all different ways to create handmade flowers. I love flowers. Pink ones. Yellow ones. All flowers. I want to create fabric ones, paper ones, repurposed ones; any material is game.

The actual creating part is the hardest. I scour the Internet for great tutorials on flower making. Not all are good. In fact, most are bad. And not just bad, but awful. The final product itself is beautiful, but the creator's directions suck. If I can't fully comprehend the instructions, I won't make a beautiful flower. I've made many bad ones. And it's frustrating. I see pictures of amazingly beautiful fabric roses that are bright and puffy and perfect. I try to emulate that picture. And I fail. I make cute fabric flowers. But my final product isn't what I wanted.

Yes, part of the problem is my inexperience creating these flowers. But another part is the sorry instructions the creator gives. If the directions say to twist the fabric, I also would like to know how tightly. Because that greatly affects my finished product. I want to know details. I don't care how long the post is.

I want this tutorial to be perfect. I don't care if I get a single comment. I want my tutorial to help those who want to create but feel as if other tutorials always have a step missing.

If that's you, then welcome home.

I want to give credit where credit's due. Thank you Aunt Peaches for inspiring my project in the first place.


Your supplies:


1. Coffee filters in multiples of 5 - 1 flower can be made from 5 filters
2. Drinking straws - with or without bendy part.
3. Masking tape - I understand that green masking tape is available. In that case, omit #6
4. Washable markers - I used Crayola High and Low markers (double ended!)
5. Scissors
6 Floral tape - In case green masking tape is not available, like it wasn't for me.
7. Squirt/Misting bottle - filled with plain tap water
8. Hair dryer
9. Towels - things could get messy!
10. Glue - optional, just in case



Instructions

1. Separate and stack coffee filters by 5s. One flower is comprised of 5 coffee filters, so you must decide how many you want to create. Keep stacks separate at all times. You also want to decide what colors you would like your flowers to be. If you want plain white flowers, skip to step 3.


2. If you would like colored flowers, this is the time to get out the markers. Flatten out 1 filter from a stack and scribble all over one side of filter with a colored marker. I made thick scribbles simply to save time. More scribbles mean a darker finished color. I wanted very vibrant flowers, so I tried to cover as much area of the filter as possible. Repeat with each filter in a stack. Make sure to keep your stacks together.


3.Now it's time to get the sink ready. I had my water-filled mist sprayer handy, as well as the hair dryer and towel for messes.

These instructions only pertain to white flowers. If you are making colored flowers, skip to step 5. Soak plain filters in water then wring out excess water. While coffee filters are much more durable than tissue paper, it can still tear. Be careful!


4. Dry wet coffee filters with a hair dryer on warm heat. It should only take a minute or so to fully dry. Expect the filters to be a little crinkled. Place back in stacks of 5.


5. This step is for colored flowers. Take 1 filter from a stack and spritz it with water. Do not get the filter so wet that it is dripping, but enough to get the entire filter good and wet. The colors on the filter will bleed together. Ball the filter up in your hand and squeeze. Squeeze tightly to wring out excess water if you want a muted color. Do not wring excess water if you want a more vibrant color. Dry with a hair dryer as was done in step 4 with the plain filter. Keep your stacks in order!

Once dried, this is what my filters looked like.


6.
If your straws have a bend, snip it off like the picture above shows. Discard the short end.

Do yourself a favor and already have 5 strips of masking tape pre-cut before you begin assembling. They only need to be about 2 inches long.


7. To begin assembling the center of the flower, fold a filter in half, and then once more. The filter will look like the picture above. Folding helps you find the center of the circle.

Unfold the filter. Find the center and pinch.

Tightly twist the center as picture shows. I wanted to twist enough so that I had enough of the filter to secure to the straw.

Tape the twisted filter to the side of the straw to secure.


8. To create outer layers of the flower, fold a filter the same as done in step 7. This time, snip a tiny bit off the end of the filter. This creates a hole in the center of the filter.

Slide the straw through the hole in the filter. Begin twisting around the center filter until you are pleased with the way it looks. Tape the filter to the straw. Repeat with last 3 filters.

This is what my finished flower looks like. The lump at the base of the flower is all the tape I used. This is okay. I also added a long strip of tape down the whole length of the straw. If using green masking tape, this would finish the look. For those using floral tape, the masking tape down the straw helps with the floral tape sticking.

If using floral tape, wrap it carefully around the entire length of the straw.

Now you're finished!!



I added some green leaves to mine. I went through the same process of coloring and wetting and drying filters, except in green.

Now these will sit pretty on our kitchen table. I'm very proud of the work I did, so no one else should be afraid to try this tutorial. If you find an easier/better way to do something, go for it! Always take inspiration from tutorials and make it your own. But what I love about this particular flower is that imperfections are hardly noticeable!

Have fun making beautiful flowers for spring! Maybe the weather will take a hint!



M

2 comments:

  1. Lady, why didn't you tell me you made these amazing flowers?! I just saw your comment and followed back to see what you are up to...glad I did!

    Well, I am so glad you took my tutorial and made it your own. I know what you mean about wanting your flowers to be perfect, but it's funny you say that since I first wrote that tutorial thinking it was something that would only look *better* with more imperfections!! Ha, ha. Actually, in general, the best art projects are the ones that insist that the creator put there own spin in there...and look, you gone and spun a whole new garden :) Love it! I also like that you used the marker method to color them. Very kewl.

    Unrelated: I'm going to do a post in the next week or so featuring a variations on some of my previous projects --hope you don't mind if I link up!

    ReplyDelete
  2. Thanks bunches for the comment! I try out so many craft projects that I have never thought to tell the originator about them. I guess I should! I greatly enjoy all of your craft projects - so creative and fun to make!

    I'm getting better at trying not to be so concerned with perfection with projects. I think you are right about imperfections being great and actually, I bet they look more realistic that way.

    I'd be thrilled if you linked back to me!

    ReplyDelete